Technical Parameter
| Conventional parameters | |
|---|---|
| Equipment Model | PC200-11M0 |
| Model Abbreviation | 200 |
| Weight Range | Medium Dredge(13-30Ton) |
| Traveling Method | Crawler |
| Bucket Type | Backhoe |
| Operating Conditions | General purpose |
| Power Type | Fuel |
| Engine (Fuel) | |
| Engine Brand | Komatsu |
| emission standard | Stage IV |
| Model | SAA6D107E-3 |
| Type | Water-cooled、4 Stroke、Direct Injection |
| Rated Power (kW) | 123.2 |
| Rated Speed (r/min) | 2000 |
| Total Displacement (L) | 6.69 |
| Number of Cylinders | 6 |
| Bore × Stroke (mm) | 107×124 |
| Performance Parameters | |
| Operating Weight (kg) | 20500 |
| Bucket Capacity (m³) | 0.94~1.20 |
| Travel Speed (High/Low) (km/h) | 5.5/3.0 |
| Swing Speed (rpm) | 12.4 |
| Grounding pressure(kPa) | 47.0 |
| Slope Climbing Ability(%) | 70 |
| Bucket Digging Force (kN) | 149 |
| Arm Digging Force (kN) | 108 |
| Arm Length (mm) | 5700 |
| Boom Length (mm) | 2925 |
| Maximum Traction Force (kN) | 178 |
| Machine Dimensions | |
| Length × Width × Height (Transportation Status) (mm) | 9505×2800×2995 |
| Cabin Full Height (mm) | 3045 |
| Clearance Over Counterweight (mm) | 1085 |
| Track Ground Length (mm) | 3275 |
| Total Track Length (mm) | 4070 |
| Track Shoe Width (mm) | 600 |
| Overall Track Width (mm) | 2800 |
| Track Gauge (mm) | 2200 |
| Minimum Ground Clearance (mm) | 440 |
| Minimum Turning Radius (Front Work Device) (mm) | 3040 |
| Rear End Swing Radius (mm) | 2830 |
| Working Range | |
| Maximum Digging Radius (mm) | 9875 |
| Maximum Digging Radius at Ground Level (mm) | 9700 |
| Maximum Digging Depth (mm) | 6620 |
| Maximum Digging Height (mm) | 10000 |
| Maximum Dumping Height (mm) | 7110 |
| Maximum Vertical Digging Depth (mm) | 5980 |
| Fluid Capacities | |
| Fuel Tank (L) | 400 |
| Hydraulic Tank (L) | 132 |
| Engine Oil Replacement Volume (L) | 24.6 |
| Coolant Capacity (L) | 29 |
| Hydraulic System | |
| Main Pump Type | Variable Piston Pumps |
| Maximum Flow Rate of Main Pump (L/min) | 490 |
| Travel Hydraulic Motor Type | 2Axial piston motor with parking brake |
| Swing Hydraulic Motor Type | 1Axial piston motor with rotary holding brake |
| Working Hydraulic Circuit (Mpa) | 37.3 |
| Travel Hydraulic Circuit (Mpa) | 37.3 |
| Swing Hydraulic Circuit (Mpa) | 28.9 |
| Maximum Pressure of Pilot System (Mpa) | 3.2 |
| Arm Cylinder - Bore × Stroke (mm) | 2–120×1334×85 |
| Boom Cylinder - Bore × Stroke (mm) | 1–135×1490×95 |
| Bucket Cylinder - Bore × Stroke (mm) | 1–115×1120×80 |
| Swing System | |
| Driving method | Hydraulic drives |
| Swing Reduction Device | Planetary gear type |
| Swing Support Lubrication | Immersion lubricated |
| Swing Braking | Hydraulic locking type |