Technical Parameter
| Conventional parameters | |
|---|---|
| Equipment Model | SE260LC-9 |
| Model Abbreviation | 260 |
| Weight Range | Medium Dredge(13-30Ton) |
| Traveling Method | Crawler |
| Bucket Type | Backhoe |
| Operating Conditions | General purpose |
| Power Type | Fuel |
| Engine (Fuel) | |
| Engine Brand | Cummins |
| Model | QSB7 |
| Type | High pressure common rail Water-cooled Inline6Cylinder Turbocharged |
| Rated Power (kW) | 169 |
| Rated Speed (r/min) | 2050 |
| Total Displacement (L) | 6.7 |
| Number of Cylinders | 6 |
| Performance Parameters | |
| Operating Weight (kg) | 25500 |
| Bucket Capacity (m³) | 1.3 |
| Travel Speed (High/Low) (km/h) | 5.5/3.8 |
| Swing Speed (rpm) | 11.3 |
| Grounding pressure(kPa) | 49.2 |
| Slope Climbing Ability(%) | 70 |
| Bucket Digging Force (kN) | 175 |
| Arm Digging Force (kN) | 125 |
| Maximum Traction Force (kN) | 274 |
| Machine Dimensions | |
| Length × Width × Height (Transportation Status) (mm) | 9985×3180×3075 |
| Clearance Over Counterweight (mm) | 1083 |
| Track Ground Length (mm) | 4660 |
| Track Shoe Width (mm) | 600 |
| Overall Track Width (mm) | 3180 |
| Track Gauge (mm) | 2580 |
| Minimum Ground Clearance (mm) | 465 |
| Minimum Turning Radius (Front Work Device) (mm) | 3276 |
| Rear End Swing Radius (mm) | 3080 |
| Working Range | |
| Maximum Digging Radius (mm) | 10198 |
| Maximum Digging Radius at Ground Level (mm) | 10015 |
| Maximum Digging Depth (mm) | 6864 |
| Maximum Digging Height (mm) | 10180 |
| Maximum Dumping Height (mm) | 7200 |
| Maximum Vertical Digging Depth (mm) | 5978 |
| Fluid Capacities | |
| Fuel Tank (L) | 480 |
| Hydraulic Tank (L) | 190 |
| Engine Oil Replacement Volume (L) | 26 |
| Coolant Capacity (L) | 28 |
| Hydraulic System | |
| Main Pump Type | Duplex axial variable piston pump |
| Maximum Flow Rate of Main Pump (L/min) | 2x252 |
| Travel Hydraulic Motor Type | Axial variable piston motor |