Technical Parameter
| Conventional parameters | |
|---|---|
| Equipment Model | R110VS |
| Model Abbreviation | 110 |
| Excavator Weight (t) | 11.2 |
| Traveling Method | Crawler |
| Bucket Type | Backhoe |
| Operating Conditions | General purpose |
| Engine (Fuel) | |
| Engine Brand | Mitsubishi |
| Model | 4FRC |
| Type | 4Cylinder、4Stroke、Water-cooled，Direct injection engine |
| Rated Power (kW) | 74 |
| Rated Speed (r/min) | 2000 |
| Bore × Stroke (mm) | 102×130 |
| Performance Parameters | |
| Operating Weight (kg) | 11200 |
| Bucket Capacity (m³) | 0.45 |
| Travel Speed (High/Low) (km/h) | 5.5/3.4 |
| Swing Speed (rpm) | 13 |
| Grounding pressure(kPa) | 0.39 |
| Slope Climbing Ability(%) | 70 |
| Arm Length (mm) | 4300 |
| Boom Length (mm) | 2260 |
| Machine Dimensions | |
| Length × Width × Height (Transportation Status) (mm) | 7270×2490×2720 |
| Cabin Full Height (mm) | 2800 |
| Clearance Over Counterweight (mm) | 900 |
| Track Ground Length (mm) | 2610 |
| Total Track Length (mm) | 3340 |
| Track Shoe Width (mm) | 500 |
| Track Gauge (mm) | 1990 |
| Minimum Ground Clearance (mm) | 440 |
| Minimum Turning Radius (Front Work Device) (mm) | 2380 |
| Rear End Swing Radius (mm) | 2130 |
| Working Range | |
| Maximum Digging Radius (mm) | 7740 |
| Maximum Digging Radius at Ground Level (mm) | 7610 |
| Maximum Digging Depth (mm) | 5090 |
| Maximum Digging Height (mm) | 8070 |
| Maximum Dumping Height (mm) | 5710 |
| Maximum Vertical Digging Depth (mm) | 4430 |
| Fluid Capacities | |
| Fuel Tank (L) | 250 |
| Hydraulic Tank (L) | 100 |
| Engine Oil Replacement Volume (L) | 17.5 |
| Coolant Capacity (L) | 24 |
| Hydraulic System | |
| Main Pump Type | Two variable piston pumps |
| Maximum Flow Rate of Main Pump (L/min) | 2×112 |
| Travel Hydraulic Motor Type | Two-speed axial piston motor with brake valve and parking brake |
| Swing Hydraulic Motor Type | Axial piston motor with automatic brake |
| Arm Cylinder - Bore × Stroke (mm) | 2-95×70×1015 |
| Boom Cylinder - Bore × Stroke (mm) | 1-110×75×1070 |
| Bucket Cylinder - Bore × Stroke (mm) | 1-95×65×855 |