Technical Parameter
| Conventional parameters | |
|---|---|
| Equipment Model | SC360SD.8 |
| Model Abbreviation | 360 |
| Excavator Weight (t) | 40 |
| Traveling Method | Crawler |
| Bucket Type | Backhoe |
| Operating Conditions | Special type |
| Engine (Fuel) | |
| Engine Brand | Cummins |
| Model | 6CTAA.3 |
| Rated Power (kW) | 198 |
| Rated Speed (r/min) | 2000 |
| Performance Parameters | |
| Operating Weight (kg) | 40000 |
| Bucket Capacity (m³) | 1.17 |
| Travel Speed (High/Low) (km/h) | 4 |
| Swing Speed (rpm) | 10.6 |
| Grounding pressure(kPa) | 14 |
| Slope Climbing Ability(%) | 30 |
| Bucket Digging Force (kN) | 138 |
| Arm Digging Force (kN) | 115 |
| Arm Length (mm) | 7600 |
| Boom Length (mm) | 3045 |
| Machine Dimensions | |
| Length × Width × Height (Transportation Status) (mm) | 13150*6230*4225 |
| Cabin Full Height (mm) | 4250 |
| Clearance Over Counterweight (mm) | 2140 |
| Track Ground Length (mm) | 6137 |
| Total Track Length (mm) | 9165 |
| Overall Track Width (mm) | 1820 |
| Track Gauge (mm) | 3915 |
| Minimum Ground Clearance (mm) | 1180 |
| Minimum Turning Radius (Front Work Device) (mm) | 5330 |
| Rear End Swing Radius (mm) | 3418 |
| Working Range | |
| Maximum Digging Radius (mm) | 11975 |
| Maximum Digging Radius at Ground Level (mm) | 11590 |
| Maximum Digging Depth (mm) | 6750 |
| Maximum Digging Height (mm) | 11650 |
| Maximum Dumping Height (mm) | 8780 |
| Maximum Vertical Digging Depth (mm) | 6145 |
| Fluid Capacities | |
| Fuel Tank (L) | 595 |
| Hydraulic Tank (L) | 310 |
| Hydraulic System | |
| Main Relief Valve Setting Pressure (Mpa) | 34.3 |
| Maximum Flow Rate of Main Pump (L/min) | 265*2+30 |