Technical Parameter
| Conventional parameters | |
|---|---|
| Equipment Model | ZX130-5A |
| Model Abbreviation | 130 |
| Weight Range | Small excavator(4-13Ton) |
| Traveling Method | Crawler |
| Bucket Type | Backhoe |
| Operating Conditions | General purpose |
| Power Type | Fuel |
| Engine (Fuel) | |
| Engine Brand | Isuzu |
| Model | Isuzu GJ-4JJ1XKSA-03 |
| Type | 4Stroke、Water-cooled、Direct Injection |
| Rated Power (kW) | 69 |
| Rated Speed (r/min) | 2000 |
| Maximum Torque (N·m) | 354 |
| Total Displacement (L) | 2.999 |
| Number of Cylinders | 4 |
| Bore × Stroke (mm) | 95x105 |
| Performance Parameters | |
| Operating Weight (kg) | 12500 |
| Bucket Capacity (m³) | 0.5 |
| Travel Speed (High/Low) (km/h) | 5.5/3.3 |
| Swing Speed (rpm) | 13.3 |
| Grounding pressure(kPa) | 39 |
| Slope Climbing Ability(%) | 70 |
| Bucket Digging Force (kN) | 104 |
| Arm Digging Force (kN) | 69 |
| Arm Length (mm) | 4600 |
| Boom Length (mm) | 2520 |
| Maximum Traction Force (kN) | 117 |
| Machine Dimensions | |
| Length × Width × Height (Transportation Status) (mm) | 7700×2490×2790 |
| Cabin Full Height (mm) | 1675 |
| Clearance Over Counterweight (mm) | 840 |
| Track Ground Length (mm) | 2880 |
| Total Track Length (mm) | 3580 |
| Track Shoe Width (mm) | 500 |
| Overall Track Width (mm) | 2490 |
| Track Gauge (mm) | 1990 |
| Minimum Ground Clearance (mm) | 410 |
| Minimum Turning Radius (Front Work Device) (mm) | 2400 |
| Rear End Swing Radius (mm) | 2190 |
| Working Range | |
| Maximum Digging Radius (mm) | 8300 |
| Maximum Digging Radius at Ground Level (mm) | 8170 |
| Maximum Digging Depth (mm) | 5540 |
| Maximum Digging Height (mm) | 8600 |
| Maximum Dumping Height (mm) | 6190 |
| Maximum Vertical Digging Depth (mm) | 4750 |
| Fluid Capacities | |
| Fuel Tank (L) | 280.0 |
| Hydraulic Tank (L) | 70.0 |
| Engine Oil Replacement Volume (L) | 17.0 |
| Coolant Capacity (L) | 24.0 |
| Hydraulic System | |
| Main Pump Type | 2Two variable axial piston pumps+1Gear pumps |
| Maximum Flow Rate of Main Pump (L/min) | 2x117 |
| Travel Hydraulic Motor Type | 2Variable displacement axial piston motors |
| Swing Hydraulic Motor Type | 1Axial piston motors |
| Working Hydraulic Circuit (Mpa) | 34.3 |
| Travel Hydraulic Circuit (Mpa) | 34.3 |
| Swing Hydraulic Circuit (Mpa) | 32.3 |
| Maximum Pressure of Pilot System (Mpa) | 4.0 |
| Arm Cylinder - Bore × Stroke (mm) | 2-105×70 |
| Boom Cylinder - Bore × Stroke (mm) | 1-115×80 |
| Bucket Cylinder - Bore × Stroke (mm) | 1-100×70 |
| Maximum Flow Rate of Pilot System (L/min) | 33.6 |