Technical Parameter
| Conventional parameters | |
|---|---|
| Equipment Model | EX2600-6BH |
| Model Abbreviation | 2600 |
| Excavator Weight (t) | 254 |
| Traveling Method | Crawler |
| Bucket Type | Straight bucket |
| Operating Conditions | Mining |
| Engine (Fuel) | |
| Engine Brand | Cummins |
| Model | QSKTA50-CE |
| Rated Power (kW) | 1119 |
| Rated Speed (r/min) | 1800 |
| Total Displacement (L) | 50.0 |
| Performance Parameters | |
| Operating Weight (kg) | 254000 |
| Bucket Capacity (m³) | 15/17 |
| Travel Speed (High/Low) (km/h) | 2.3/1.6 |
| Swing Speed (rpm) | 3.8 |
| Grounding pressure(kPa) | 185 |
| Slope Climbing Ability(%) | 58 |
| Bucket Digging Force (kN) | 830 |
| Arm Digging Force (kN) | 785 |
| Arm Length (mm) | 8700 |
| Boom Length (mm) | 3900 |
| Machine Dimensions | |
| Length × Width × Height (Transportation Status) (mm) | 6000（Wide）*7250（High） |
| Cabin Full Height (mm) | 7250 |
| Clearance Over Counterweight (mm) | 2060 |
| Track Ground Length (mm) | 6120 |
| Total Track Length (mm) | 7870 |
| Track Shoe Width (mm) | 1000 |
| Overall Track Width (mm) | 6000 |
| Track Gauge (mm) | 5000 |
| Minimum Ground Clearance (mm) | 800 |
| Minimum Turning Radius (Front Work Device) (mm) | 790 |
| Working Range | |
| Maximum Digging Radius (mm) | 16600 |
| Maximum Digging Radius at Ground Level (mm) | 16050 |
| Maximum Digging Depth (mm) | 8250 |
| Maximum Digging Height (mm) | 15800 |
| Maximum Dumping Height (mm) | 10100 |
| Maximum Vertical Digging Depth (mm) | 4110 |
| Fluid Capacities | |
| Fuel Tank (L) | 5300 |
| Hydraulic System | |
| Main Pump Type | 6Variable axial piston pumps for front-end working devices、Traveling and rotating Variable displacement axial piston pumps |
| Main Relief Valve Setting Pressure (Mpa) | 29.4 |
| Maximum Flow Rate of Main Pump (L/min) | 4*375，2*425 |