Technical Parameter
| Conventional parameters | |
|---|---|
| Equipment Model | QNL150S |
| Model Abbreviation | 150 |
| Excavator Weight (t) | 13.8 |
| Traveling Method | Tire Type |
| Engine | |
| Engine Brand | Cummins |
| Model | CUMMINS 4BTAA3.9 |
| Rated Power (kW) | 85.4 |
| Rated Speed (r/min) | 2200 |
| Maximum Torque (N·m) | 477 |
| Total Displacement (L) | 3.9 |
| Number of Cylinders | 4 |
| Performance Parameters | |
| Operating Weight (kg) | 13800 |
| Bucket Capacity (m³) | 0.58 |
| Travel Speed (High/Low) (km/h) | 30 |
| Swing Speed (rpm) | 13 |
| Slope Climbing Ability(%) | ＞70 |
| Bucket Digging Force (kN) | 82.7 |
| Arm Digging Force (kN) | 74.2 |
| Arm Length (mm) | 4927/5680 |
| Boom Length (mm) | 2100 |
| Machine Dimensions | |
| Length × Width × Height (Transportation Status) (mm) | 8880×2530×3260 |
| Clearance Over Counterweight (mm) | 1260 |
| Wheelbase (mm) | 2600 |
| Track Gauge (mm) | 1944 |
| Minimum Ground Clearance (mm) | 378 |
| Minimum Turning Radius (Front Work Device) (mm) | 2915 |
| Rear End Swing Radius (mm) | 2388 |
| Working Range | |
| Maximum Digging Radius (mm) | 9020 |
| Maximum Digging Radius at Ground Level (mm) | 8820 |
| Maximum Digging Depth (mm) | 5570 |
| Maximum Digging Height (mm) | 10035 |
| Maximum Dumping Height (mm) | 7575 |
| Maximum Vertical Digging Depth (mm) | 4650 |
| Fluid Capacities | |
| Fuel Tank (L) | 270 |
| Hydraulic Tank (L) | 125 |
| Hydraulic System | |
| Main Pump Type | Axial Variable Piston Dual Pumps |
| Maximum Flow Rate of Main Pump (L/min) | 2×132 |
| Travel Hydraulic Motor Type | Inclined Shaft Variable Piston Motor |
| Swing Hydraulic Motor Type | Axial Variable Piston Motor |
| Working Hydraulic Circuit (Mpa) | 330 |
| Travel Hydraulic Circuit (Mpa) | 330 |
| Swing Hydraulic Circuit (Mpa) | 270 |
| Pilot Circuit (Mpa) | 40 |