Technical Parameter
| Conventional parameters | |
|---|---|
| Equipment Model | SY16C |
| Model Abbreviation | 16 |
| Weight Range | Micro digger(4Below tons) |
| Traveling Method | Crawler |
| Bucket Type | Backhoe |
| Operating Conditions | General purpose |
| Power Type | Fuel |
| Engine (Fuel) | |
| Engine Brand | Yanmar |
| emission standard | Stage IV |
| Model | 3TNV80F |
| Rated Power (kW) | 14.6 |
| Maximum Torque (N·m) | 67.4 |
| Total Displacement (L) | 1.267 |
| Performance Parameters | |
| Operating Weight (kg) | 1910 |
| Bucket Capacity (m³) | 0.04 |
| Travel Speed (High/Low) (km/h) | 4.0/2.7 |
| Swing Speed (rpm) | 10 |
| Grounding pressure(kPa) | 29.1 |
| Slope Climbing Ability(%) | 58 |
| Bucket Digging Force (kN) | 16.6 |
| Arm Digging Force (kN) | 10 |
| Machine Dimensions | |
| Length × Width × Height (Transportation Status) (mm) | 3575×980×2420 |
| Track Ground Length (mm) | 1225 |
| Total Track Length (mm) | 1585 |
| Track Shoe Width (mm) | 230 |
| Track Gauge (mm) | 750/1120 |
| Minimum Ground Clearance (mm) | 180 |
| Minimum Turning Radius (Front Work Device) (mm) | 1655 |
| Rear End Swing Radius (mm) | 920 |
| Working Range | |
| Maximum Digging Radius (mm) | 4000 |
| Maximum Digging Depth (mm) | 2360 |
| Maximum Digging Height (mm) | 3665 |
| Maximum Dumping Height (mm) | 2635 |
| Maximum Vertical Digging Depth (mm) | 2215 |
| Blade Width × Height (mm) | 270 |
| Blade Lifting or Cutting Depth (mm) | 310/320 |
| Fluid Capacities | |
| Fuel Tank (L) | 23 |
| Hydraulic Tank (L) | 21 |
| Engine Oil Replacement Volume (L) | 3.4 |
| Coolant Capacity (L) | 4.5 |
| Hydraulic System | |
| Maximum Flow Rate of Main Pump (L/min) | 66 |