Technical Parameter
| Conventional parameters | |
|---|---|
| Equipment Model | SY26U |
| Model Abbreviation | 26 |
| Weight Range | Micro digger(4Below tons) |
| Traveling Method | Crawler |
| Bucket Type | Backhoe |
| Operating Conditions | General purpose |
| Power Type | Fuel |
| Engine (Fuel) | |
| Engine Brand | Yanmar |
| emission standard | Stage IV |
| Model | Yanmar 3TN80F/Kubota D1105 |
| Type | Inline、Water-cooled、Four-stroke、 Mechanical pump、Naturally aspirated |
| Rated Power (kW) | 14.6kW(Yanmar)/15.4kW(Kubota) |
| Maximum Torque (N·m) | 67.4Nm(Yanmar)/71.4Nm(Kubota) |
| Total Displacement (L) | 1.267L(Yanmar)/1.123L(Kubota) |
| Performance Parameters | |
| Operating Weight (kg) | 2680 |
| Bucket Capacity (m³) | 0.04-0.08 |
| Travel Speed (High/Low) (km/h) | 4.5/2.6 |
| Swing Speed (rpm) | 9 |
| Grounding pressure(kPa) | 26 |
| Slope Climbing Ability(%) | 58 |
| Bucket Digging Force (kN) | 27.9 |
| Arm Digging Force (kN) | 14.2 |
| Machine Dimensions | |
| Length × Width × Height (Transportation Status) (mm) | 4285×1550×2430 |
| Track Ground Length (mm) | 1560 |
| Total Track Length (mm) | 2005 |
| Track Shoe Width (mm) | 300 |
| Track Gauge (mm) | 1250 |
| Minimum Ground Clearance (mm) | 290 |
| Minimum Turning Radius (Front Work Device) (mm) | 2110 |
| Rear End Swing Radius (mm) | 775 |
| Working Range | |
| Maximum Digging Radius (mm) | 4850 |
| Maximum Digging Depth (mm) | 2820 |
| Maximum Digging Height (mm) | 4410 |
| Maximum Dumping Height (mm) | 3100 |
| Maximum Vertical Digging Depth (mm) | 2585 |
| Blade Width × Height (mm) | 300 |
| Blade Lifting or Cutting Depth (mm) | 360/330 |
| Fluid Capacities | |
| Fuel Tank (L) | 34 |
| Hydraulic Tank (L) | 27 |
| Engine Oil Replacement Volume (L) | 3.4/1.6L(Yanmar)/3.5/1.8L(Kubota) |
| Coolant Capacity (L) | Water dispersion2.4L/Oil dispersion1.7L |