Technical Parameter
| Basic Parameters | |
|---|---|
| Equipment Model | DG912N |
| Model Abbreviation | 912 |
| Rated Load Capacity (kg) | 1200 |
| Operating Weight (kg) | 3300 |
| Bucket Capacity (m³) | 0.6 |
| Maximum Traction Force (kN) | Full loadⅠGear |
| Traveling Method | Tire Type |
| Operating Conditions | General purpose |
| Engine (Fuel) | |
| Engine Brand | Xichai |
| Model | 4DW91-45G2 |
| Type | Inline water-cooled four-stroke direct injection |
| Rated Power/Speed (kW/r/min) | 37/2300 |
| Hydraulic System | |
| Hydraulic Pump Type | CBG1045 |
| Flow Rate (at Rated Speed) (L/min) | 45 |
| Rated Working Pressure (Mpa) | 16 |
| Number of Boom Cylinders - Bore × Stroke (mm × mm) | 80(Bore) |
| Number of Bucket Cylinders - Bore × Stroke (mm × mm) | 90(Bore) |
| Transmission | |
| Transmission Model | Fixed Shaft Power Shift |
| Travel Speed 1st Gear (Forward/Reverse) (km/h) | 7.8/7.8 |
| Travel Speed 2nd Gear (Forward/Reverse) (km/h) | 16/16 |
| Whole machine parameters | |
| Machine Length (mm) | 5240 |
| Machine Width (mm) | 1740 |
| Machine Height (mm) | 2550 |
| Minimum Ground Clearance (mm) | 240 |
| Wheelbase (mm) | 2265 |
| Track Gauge (mm) | 1310 |
| Unloading Height - Unloading Angle at 45° (mm) | 2450 |
| Unloading Distance - Unloading Angle at 45° (mm) | 1100 |
| Steering Angle(°) | 30 |
| Minimum Turning Radius (Measured from Outer Wheel Center) (mm) | 5200 |
| Boom Raise Time (s) | 7 |
| Cycle Time (s) | 12.9 |
| Tire Type | 1200-16.5 |
| Tire specification | Tire pressure：0.25MPa Main drive type/Reduction Ratio：6 |
| Steering System | |
| Steering Pump | Steering Cylinder Model：63（Bore） |
| System Operating Pressure (Mpa) | 16 |
| Braking System | |
| Travel Braking Type | Drum |
| Parking Braking Type | Clamp disk |