Technical Parameter
| Conventional parameters | |
|---|---|
| Equipment Model | CLG5100-2 |
| Model Abbreviation | 5100 |
| Engine | |
| Model | Dongkang6BTAA5.9-C205 |
| Rated Power (kW) | 153 |
| Rated Speed (rpm) | 2200 |
| Machine Dimensions | |
| Length x Width x Height (Overall) (mm) | 11110*2460*2950 |
| Length x Width x Height (Conveyor, Canopy Folded) (mm) | 10470*2460*4560 |
| Maximum Material Feed Height (mm) | 3760 |
| Theoretical Material Feed Capacity (m³/h) | 82 |
| Length x Width x Height (Front Track) (mm) | 4940*2460*2950（Mainframe） |
| Length x Width x Height (Rear Track) (mm) | 7200*1050*1000 |
| Weight Parameters | |
| Operating Weight (with Full Water Tank) (kg) | 14000 |
| Front Track Load (with Full Water Tank) (kg) | 6300 |
| Rear Track Load (with Full Water Tank) (kg) | 7300 |
| Transport Weight (kg) | 14500 |
| Material Feeding System | |
| Aggregates Conveyor Belt Width (mm) | 400 |
| Working Parameters | |
| Travel Speed (km/h) | 0～8.4 |
| Maximum Milling Width (mm) | 1000 |
| Maximum Milling Depth (mm) | 0～180 |
| Milling Operation Speed (m/min) | 0～30 |
| Theoretical Climbing Ability (%) | 26 |
| Minimum Ground Clearance (mm) | 300 |
| Inner Turning Radius (mm) | 5000 |
| Milling Drum | |
| Tool Spacing (mm) | 15 |
| Number of Tools | 92 |
| Milling Drum Diameter (with Tools) (mm) | 750 |
| Maximum Milling Drum Tilt Angle (°) | 5 |
| Fluid Capacities | |
| Fuel Tank (L) | 370 |
| Hydraulic Tank (L) | 100 |
| Water Tank (L) | 830 |